Athos is an elegant, opaque matt textile designed by Ronan and Erwan Bouroullec. It is ideal for spaces where privacy and a pleasant environment are required. Particularly suitable for healthcare establishments, as it can be disinfected and is easy to maintain. The colour palette creates a comforting, clean environment.
Ontwerp | Ronan & Erwan Bouroullec |
Composition | Polyester |
Openness Factor | 0% |
Light transmission | 5-7% |
Width | Up to 300 cm |
Weight | 220 g/m2 |
Thickness | 0.35 mm |
Light fastness | 5-7 (ISO105-B02) |
Reflection
The amount of solar radiation that is reflected back out. A textile with a high score for reflection will keep it cooler inside.
|
colour-dependent |
Glare control
The glare factor indicates how comfortable the light that comes through the textile feels to your eyes.
|
colour-dependent |
View through
Determines your view from the inside out. The higher the score, the better you can enjoy the view.
|
colour-dependent |
Environmental
The environmental and human friendliness of a product.
|
|
Fire retardant
A high score for fire retardancy means that the product is not or very difficult to combust.
|
The textiles come with a 5-year product warranty and comply with all relevant laws, regulations and standards. Improper cleaning, outdoor use, treatment with chemically aggressive agents, and external influences (including damage, insects, contaminated condensation) are not covered by the warranty.
Dab clean with a dry or well-wrung, damp cloth. Use clean water only. Can also be cleaned using a feather duster or carefully using a hoover. Place a soft brush on the hoover and set the suction power to the lowest setting. In case of staining, we recommend contacting a professional cleaner. Remove dead insects immediately to prevent staining.
Disinfect
Textiles should be cleaned before disinfection, refer to normal maintenance guidelines, otherwise the listed agents will not work. The following agents can be used: Ethanol (disinfectant), 70-85%. Virkon 1% dilution, follow the instructions on the package. Chlorine-based agents, 1000-1200 ppm active chlorine, e.g. disposable wipes, follow package instructions. After wiping with disinfectant, rinse with clean water. Always test the agent on an invisible spot. Avoid immersing the textile or seams. Do not use solvents and/or similar products, as they will damage the surface over time.
Athos can be used in the following indoor sun protection systems: